BOD Incubator

About BOD Incubator

Laboratory BOD Incubator

Model No : - BOD01

BRAND : STANDARD STEEL

• Double wall construction. Inner chamber made of richly anodized aluminium/stainless steel sheet and Exterior made out of thick mild steel sheet duly finished in white storving enamel paint Supplied with two/three removable perforated shelves.
• Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without distributing the chamber temperature.
• The gap between wall of equipments are filled with glass wool for temp. Insulation. The cabinet is mounted on castors.
• Temperature is controlled by a sensitive thermostat from 5o C to 50o C +- 1o C. for lower temperature.
• Working a standard cooling unit with a sealed compressor with protective device has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp.
• Working the temp. can be regulated within the range by means of a high precision double action thermo-regulator. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.
• A control panel is provided with various indicators, on-off switch, L shaped thermometer. Supplied with cord and plug etc. the equipments is workable on 220 V AC 50 Hz single phase.
• Available Models